Document for an image series recall the Installation/Project/Exp/Device/Record, which must fit with the position of the document in the data tree. Name (dir) of the associated project file name xxx_1_1.ext of the first image in the series, formed with the root xxx= name of this xml file (without .xml ext), the image indices 1 and 1, and the image extension .ext. For simple series the first image name is xxx_1.ext date of the image record program which generates the images and creates this xml file Parameters of the camera used and times of images Name of the camera width x height x nbre of bits Name of the camera objective Type of optical filter used on the camera (default='none') Gain of the camera modes: 'series' (NbFramePerBurst=1), 'burst', 'multilevel' (Nbslice >1), 'volume' Nbre of image slices for ScanMode= 'multilevel' or 'volume', (=1 for 'Mode'=series or burst) trigger mode for the image acquisition, 'manual' or 'auto' (external signal) unit of time in the 'Camera' item (s) exposure time for each image (unit=TimeUnit( describes the times of a sub-set of images frame frequency of the camera (unit=inverse of TimeUnit) time intervals between images inside each burst, unit=frame (inverse of FrameFrequency). For ScanMode='series', Dtj=[]; for 'ScanMode='burst' or 'multilevel'; format [xx,yy,zz], vector with dimension=NbFramePerBurst-1; for ScanMode='volume' , Dtj=cte (generally =1). (optional) number of repetion of Dtj, useful for volume ScanMode image index i, incremented from the first image at DateOrigin program which generates the images (same as for 'Heading') [n1,n2,...] number of steps for each successive displacement motion length corresponding to a motor step (in units given by ImaDoc/GeometryCalib/CoordUnit) unit=inverse of TimeUnit Amplitude of laser sweep (volt) Offset of laser sweep (volt) calibration for laser deviation angle (degrees/volts) Parameters for image calibration unit used for all spatial coordinates in the experiements (velocity in CoordUnit/TimeUnit) focal length of the objective (in mm), ajusted by the calibrationn program pixels per mm along each direction on the camera captor radial deformation of the objective (in unit 1/CoordUnit **2) translation constants (in units CoordUnit) rotation angles matrix of rotation parameters precision of the fit of the calibration points to the Tsai model file name of the image used for calibration sets of coordinates [x,y,z] of the calibration points (in unit CoordUnit) Properties of the illumination name of the light source (laser) power of the light source (in watts) optical filter for light source origin of the laser source in physical coordinates [x,y,z]. The position for the reference index RefSliceIndex is used in case of translation scan Euler angles defining the illumination plane for the reference index RefSliceIndexe. [0,0,0] by default thickness of the laser sheet (width of the band with luminosity> max/2) angle of aperture of the laser sheet, in degrees lens used to make the laser sheet or 'oscillator' for oscillating mirror type of source motion, 'translation' or 'rotation', 'none' by default. angle separation between two successive sheet positions (in degrees) =0 for translating scanning vector [v1,v2,v3] defining the direction of source translation in phys coordinates, or the axis of rotation in 'rotation' mode ([0,0,1] for vertical motion) device used for scan 'StepperMotor' or 'Oscillator' Properties of the flow tracor density of particles in kg/liter Parameters used for image processing (sub background) list of cameras used liste of camera objectives